Want to place an ad email luke@realbeer.co.nz
$50+GST / month

RealBeer.co.nz

How Do You Know How Much ABV Is In Beer, After It's Bottled??

Hey guys on my first ever brew day everything didn't go according to plan but even though it looks good and has carbed well, I don't know about the alcohol level, the reason being I was given advice on the volume when I filled the fermenter and it cam to 18L not 23L to add 5 litres of water (filtered) and the hydrometer reading I took that day was far too hot and didn't record it!!! so now faced with the question is it alcohol at all? I have had three 500ml bottles and didn't notice anything so how can I find out now??

Help Daza.

cheers.

Views: 384

Reply to This

Replies to This Discussion

You can measure the finished gravity, sample in a trial jar, le

ave to go flat then used hydrometer. Then its a guess where it started, if you kept records then you could estimate a range of starting gravities based on grain bill, water vol and an assumed efficiency. Or geta lab analysis done, not really worth it

Hey true just go back to the recipe it says OG was 1.052 not that my reading was accurate but that will be a good place to start, now the hard part letting my go flat on purpose!

my understanding is that you added 5 litres to that so the OG would come down to ~1042 

the recipe would be based on an assumed efficiency which would not normally be hit on your first brew, so conceivably your original gravity could be down at 1035-8ish so its probably mid to high 3's based on a heap of assumption and guess work

I'm thinking this depends on why he only got 18L - if he boiled off more than expected then the 18L would be expected to have a higher OG and watering it down would bring it back to the 1.052 mark (less any efficiency issues he may have due to being the first beer). If it was he left a whole lot of wort throughout the process then what you said would be correct.

Darren - any idea what your volume was pre-boil?

hi matt, true, i assumed the og was for the 18 l but that could be completed wrong, well done on finding time to make beers for competitions too, good luck with that

yep it was 30L pre-boil. 20L post boil (75min) I guess other 2 was from cooling and transfer.  I like where your head is at, like a detective working on the case of the missing ABV!!!

Or like said above take a reading post your grain bill and we could come to some assumptions based on efficiency to get a ball park SG

I'll do it tomorrow, only need a 100ml in trial jar. Let you know the reading then. Cheers
Ok cool Peter not what I was aiming for but I'll take it....I made alcohol!!! Yay.
I did do a real vigorous boil for 75 min losing 10L from 30L giving me 20L before cooking and transferring to fermenter giving me 18L
Cooling not cooking
If you buy/borrow a refractometer you can calculate the abv from a hydrometer reading and a refractometer reading.

RSS

© 2024   Created by nzbrewer.   Powered by

Badges  |  Report an Issue  |  Terms of Service