Grab One Hot Water Urn Deals

[Dene McDonald]

http://www.grabone.co.nz/dunedin-invercargill/hot-water-urn-14l

Highlights

• Heat your water in a vessel not out of the Middle Ages.
• Grab a hot water urn from $69 from Bargain Store.
• Use for yonks — resistant to corrosion.
• Boil safely using the safety cut-out switch.
• Prevent mess with a non-drip tap.

Double, double, toil and trouble; fire burn and cauldron bubble. Boiling witches brew, or even just hot water for a cuppa, is a darn sight easier with modern sorcery. Grab a hot water urn from $69 from Bargain Store.

Pay $69 for a 14L urn.
Pay $79 for a 22L urn.
Pay $89 for a 28L urn.
Pay $109 for a 48L urn. 

Details:

• Material: stainless steel body and lid, chrome-plated brass tap
• Vented lid
• Welded joints for superior corrosion resistance and effortless cleaning
• Safety cut-out switch
• Non-drip tap
• Available in four sizes: 14L, 22L, 28L, 48L

[Ralph]

Hmmm. Anyone got one of these? Does the 48L one come to a boil reasonably quickly? 

[Dave W]

Yes I brought this brand a year ago.

Works great I got the 48L one.

45L from tap temp to strike temp in usually around 55min.

the plug is a larger one due to higher amps needed, looks just like a normal plug but is thicker/bigger and fits the oven type wall socket.

I've been happy with it, nothing flash but works well.

[Paul Fraser]

Do they have a sight glass included? On another forum someone else was talking about them and apparently the 48L ones have sold out now.

[Dave W]

Nope no sight glass

[Peter Smith]

pretty good deal if you wanted even a HLT     an element almost costs $109

[Paul Finney]

It certainly looks like a good deal. The relevant questions have been asked on the discussion board so it will be interesting to see how they reply.

I'm always a bit wary of these things!

[Druid]

Pretty sure they're the same item as the trademe ones talked about elsewhere - the ones that have an actual volume 10 liters less than the advertised ones.

[Peter Smith]

Mine just arrived, 48L one, had a slight dent in one side about 10cm pushed it out, going to cover in insulation add a PID and turn into a HLT.    Simple, but I am happy and at $109, I think these are reasonably priced.    Now add a 10g cooler and some cam locks.    Attach to my Iwakai pumps and I have 3V.   Who either sells cam locks or makes cam lock hoses in AKL.