Want to place an ad email luke@realbeer.co.nz
$50+GST / month
Tags:
Make one man, easy as to do:
https://byo.com/stories/issue/item/398-build-your-own-stir-plate
I second that especially if you have access to an old computer.
The parts for mine were:
Cut blades off fan glued magnets (2 stacked) to top. Joined 2 wires form fan to 2 from plug. Fit in box. Done.
I tried 5v USB power 1st but too weak some, folks have a variable resistor for speed control but mine works well without.
I use a variable voltage adapter for my speed control works mint. Can get them on trademe for around $15
I have one of these , they sell about $70 second hand every so often.
© 2024 Created by nzbrewer. Powered by