grainmill

[dean fisher]

hi all
I'm after a grainmill, I have seen the hardys ones from allgrain are they the best options for price etc or what else should I be looking at. I wanna get one that's gonna last and don't really mind spending the money to get a decent one

any input is greatly appreciated

[Peter Smith]

I got a barley crusher off s chineese guy on trademe its great done about 150 kg so far no issues I am pretty sure its an aliexpress one I use a $29 bunnings drill with it I Have posted pictures before. the only issue is hoper is too small I replacing with water cooler note shaft is 3/8

[Peter Smith]

I got a barley crusher off s chineese guy on trademe its great done about 150 kg so far no issues I am pretty sure its an aliexpress one I use a $29 bunnings drill with it I Have posted pictures before. the only issue is hoper is too small I replacing with water cooler note shaft is 3/8

[dean fisher]

I don't think they are on trademe unless you can post a link to it? do you mind me asking how much it was?

[Scott H]

There are ones that look the same as the allgrain ones on alixpress for about $140nzd landed

[dean fisher]

I'm still abit hesitant buying from us would rather support local where possible

[Scott H]

That's from china. I'm all for supporting local business but not if the mark up is ott.

[dean fisher]

fair enough but at least I know if I am buying local and have problems the likelyhood of resolving it is greater than dealing with someone who can't even speak English. thanks anyway

[Barry]

Not to rain on any local retailers parade but the local ones are the same ones you'd be buying direct from China. Sure you get the consumer guarantees act 1 year protection, but you get pretty good buyer protection from aliex too.

[Dyl]

go to allgrain, hes a top bloke, you'll probably even get a free hug. I dont think his markups are that high.

Then you can play with a lot sooner! (assuming your local)

[Peter Smith]

It was a one off on trademe, aliexpress does money back guarantee, they mean it I saw them resend 30 stc1000 units because they sent 120v ones, By all means support local but aliexpress is very very good. By a us monster mill 1/2 inch shaft if you want to add a motor as it's easier to fit a big 300mm pulley to 1/2 inch shaft

[Peter Church]

+1 on the allgrain mill, put 15 kg through mine on the weekend, couple of battery changes on the dewalt (batteries are at the end of their life) but it does a good job, easy to adjust, hopper is not big but easily got the grain weighed and crushed while water was coming up to temp