Selling a bunch of SS fittings, valves etc

[Peter Greer]

COILS

 

3x 2" double-wound coils (4m 1/4" tube) (long tails)

1x 2" double-wound copper coil (4m 1/4" tube) (short tails)

1x 4" double-wound copper coil  (7.5m 3/8" tube)(short tails)

 

VALVES

 

2x 1/2" BSP 2-piece ball-valve (316SS) (1/2" BORE)

1x 1/2" BSP 3-piece ball-valve (316SS) (1/2" BORE)

1x 1" BSP 3-piece ball-valve (316SS) (1" BORE)

1x 1" tri-clamp 2-piece ball-valve (304SS) (3/4" BORE)

 

COUPLINGS ETC

 

 

3x 2" TC coupling (ferrule-to-ferrule)

2x 2" TC coupling (ferrule-to-cap)

11x 3" TC coupling

1x 3" RJT coupling (thread-to-ferrule)

 

1x 4" RJT blank cap

1x 4" RJT Hex Nut

3x 2" Tri-Clamp

1x 2" Tri-Blank Cap

1x 1.5" Tri-Blank

 

 

FITTINGS ETC

 

1x 2" 90-degree bend (304SS)

4x 1/2" 90-degree bend (304SS)

1x 5/8" 90-degree bend (304SS)

1x 1" tee (304SS)

1x 1/2" tee (304SS)

2x 1"x2" reducer (304SS)

1x 1.5"x2" reducer (304SS)

1x 0.5"x1" reducer (304SS)

1x 1"x2" Tri-Clamp reducer

1x 90-degree 1/2" BSP elbow

 

2x 1" BSP to 1" tube reducing nipple (316SS)

1x 1" BSP weld nipple (316SS)

1x 1/2" BSP male-to-male threaded adapter (316SS)

1x 1/2" BSP weld-socket (threaded) (304SS)

1/2" BSP MAC union (316SS)

3/8" BSP hose-barb (316SS)

 

4x 1" A-Justa-Feet (not pictured)

 

STILL STUFF

 

3x 2"x16" COLUMN SECTIONS (2" TC each end) (304SS)

1x 1"x2" tee (tri-clamp each leg)

1x 1" 90-degree elbow (tri-clamp ferrule each end) (304SS)

 

 

HEAT EXCHANGER

 

1x 2"x20" PRODUCT CONDENSER (5x 1/2" copper tube inside, 1" TC ferrule one end, leak-free, hose-barbs etc)

[Peter Greer]

Images attached to this and first post!

Selling due to some recent family issues which preclude projects etc. Would like 350 for the whole lot ideally, but could break it up. That's cheap as hell (even for just the 3" TCs it would be cheap) so I wont move too much on it.. Message me. Like them to go ASAP!

[martin w]

are the parts for a vm reflux still? what would be required to finish the still(apart from keg/element)? i might be interested

[James Stuart]

Is this gear still for sale, I'm interested if it is.

[Scott]

Hi, I'd like to add a ball valve to my pot this weekend. Do you still have the 1x 1/2" BSP 3-piece ball-valve ?

[Dave Rea]

If you still have them am after 4 x 1/2" 90 degree bend

[Chris Banks]

Does anyone on here know Peter ? I am trying to get hold of him.