Want to place an ad email luke@realbeer.co.nz
$50+GST / month
ALL SOLD THANKS GUYS
Hi,
Upgrading my equipment so selling the following. Pickup is Grey Lynn AK.
Workmaship on fittings etc is homemade, but everything is water/wort-tight!
Catermaster 40L 3kw hot water urn with sight glass (not graduated - but every 1cm = 1L. Have a few markings on there). Lid is a bit wobbly and discoloured. Ball valve on long brass nipple, brass pickup tube (good to overhang your mash tun for gravity feeding). $200. Heats up in a flash. SOLD
Kettle - 70L. Sight glass installed with 'vivid drawn on' graduations. Brass nipple, weldless and Ball valve and copper/brass pick up tube. Brass garden male disconnect. Blichmann thermometer in F. $180.
42L Mash Tun. Has a brass nipple and stainless ball valve. Perforated removable false bottom from Craft-brewer. Copper pickup tube with brass connections. Brass garden male disconnect (may need replacing or new seal in garden fitting). Blichmann Auto-sparge (flash!) and mashmaster thermometer (needs calibrating again). $230
Immersion, Whirlpool Chiller built by JoKing from Liberty Brewing. 50ft of 1/2in copper. Copper return for whirlpooling. Welded brass male disconnects. $100
Tags:
Replies are closed for this discussion.
© 2024 Created by nzbrewer. Powered by