Gonna give this brew a crack tomorrow. It's a starter Ale for a strong dark I've been planning for forever. A select few will be able to get some of the starter solution which is cranking hard at the moment.
Comments welcome.
Nutty Pale
16-B Belgian Pale Ale
Author: J Wood
Date: 9/05/2010
Size: 24.24 L
Efficiency: 82.0%
Attenuation: 79.0%
Calories: 168.39 kcal per 12.0 fl oz
Ingredients:
4.3 kg Dingeman Pilsen Malt
.500 kg Caramunich® TYPE II
.500 kg Biscuit Malt (Mout Roost 50)
50 g Fuggle (4.8%) - added during boil, boiled 60 min
20 g Fuggle (4.8%) - added during boil, boiled 5 min
1L WYeast 1762 Belgian Abbey II
00:03:00 Mash In - Liquor: 21.2 L; Strike: 71.7 °C; Target: 67 °C
01:03:00 Mash - Rest: 60.0 min; Final: 67.0 °C
01:33:00 Sparge - Sparge Volume: 22.11 L; Sparge Temperature: 75.6 °C; Runoff: 22.17 L
Looks good Jo. My next brew will most likely be a Belgian Pale Ale also.
That looks like a lot of Caramunich II & Biscuit. I personally wouldn't add that much Caramunich II, it gets cloying for me at that level. Do you reckon 26IBU will be enough to balance the Caramunich II?
Yeah - I've been going up quite high in specialties lately because I always get such a high attenuation. I remember the last Belgian Pale that I brewed being too bitter and it was only 30IBU. The buscuit malt is quite dry too - so I want a bit of body to accentuate the toasty buscuitty notes. I don;t think it'll be cloying though - I want it to end up a bit chewy, but not overly sweet.
So rather than do what (quite often) other people do on here: Ask for comments and then dismiss any comments other people make... I decided to cut back on the specialties to 300g each.
Comments from other people are all well & good but sometimes you need to trust your instincts and what you know about your own system, processes & palate. I hope I haven't put you crook.
Why do you get high attenuation? High pitching rates? Does your thermometer need recalibrating?
Not exactly brewing, but I've had a major bottling (and cleaning) session today. Since I started kegging I've been very glad to avoid bottling runs, but these 2 beers needed bottle conditioning.
First up was my Mackenzie's Windsor Ale, a spiced strong English ale for the case swap. The racked beer was tasting (and looking awesome) but I stuck to the original 19th century recipe and added the final 2 secret ingredients. Primed with just a very small amount of dextrose, finings, then into bottles. Enough for the case swap plus another 8 for me, which I intend to mature for a while. Hopefully this will have conditioned up in time for the case swap.
Then I finally got around to bottling Tintin's Black Heart, my funky Belgian stout. The brett seems to be slowing down now so it's a good time to get it into the bottles. No priming sugar, I'll just leave the brett to carb it up. I don't want much carbonation anyway. This beer is tasting intriguing, layers and layers of flavour. I might bring a bottle along to the WBC for some opinions.
Knackered now, so will crash out on the sofa for a bit with a bottle of chocolate milk - a few beers to be had later with dinner.
Grains crushed for another blond/very pale ale tomorrow.
5kg Global Cologne
.25kg Wheat
.25kg Carapils
Centennial throughout for 28IBU (tho i might sub in some Columbus at 90 and 15 for a bit of variety)
Wyeast 2565 Kolsch
Target OG - 1.051
trying to keep things simple so I can see what the Global Cologne is like.
Wort sample pre-hopping tasted awesome. Had a lovely rich sweetness with a slight nutty finish.
Decided it could handle some more late hopping so doubled the final addition and went straight Centennial from start to finish. Never used that as a single hop before so will be interested to see how it comes out.
It should be great. I love centennial - it's awesome. Ruination (which is in my top 3 IPAs) is all Centennial - so with any luck you'll get some of those characteristics in your brew.