Want to place an ad email luke@realbeer.co.nz
$50+GST / month

RealBeer.co.nz

mattd2's Discussions (490)

Discussions Replied To (415) Replies Latest Activity

"Grant, I would take "cleaner" as being low levels of esters/phenols which are usuall…"

mattd2 replied Oct 30, 2012 to Fermentation times

14 Nov 1, 2012
Reply by Dan

"16C is right on the lower end of the recomended temp range - http://www.fermentis.co…"

mattd2 replied Oct 29, 2012 to Fermentation times

14 Nov 1, 2012
Reply by Dan

"CHeers for putting that straight Dave. Do you know where it is brewed now?"

mattd2 replied Oct 26, 2012 to Kaimai Brewing Company

8 Nov 5, 2012
Reply by Adam Sparks

"Kind of weird because the article says it is brewed on either the Croucher or Harrin…"

mattd2 replied Oct 26, 2012 to Kaimai Brewing Company

8 Nov 5, 2012
Reply by Adam Sparks

"From Beer Advocate (don't know about the phone number maybe 0508?) PO Box 10121Mount…"

mattd2 replied Oct 26, 2012 to Kaimai Brewing Company

8 Nov 5, 2012
Reply by Adam Sparks

"Is that $650 Ex-works, FOB or landed in NZ? what would the 200ltr one run at? And wh…"

mattd2 replied Oct 20, 2012 to 100L SS Conical Fermenter w/ tri-clamp valves in CHCH, NZ

21 Jun 29, 2013
Reply by Scott Dean

"All good points for using low voltage DC over mains AC. Really up to 2A for the coil…"

mattd2 replied Oct 18, 2012 to Lauter Grant

18 Oct 19, 2012
Reply by Guy Gibson

"Guy makes a good point on limiting the use of 240V for controls circuits. If you did…"

mattd2 replied Oct 18, 2012 to Lauter Grant

18 Oct 19, 2012
Reply by Guy Gibson

"Depending on if the floats are rated for 240VAC you have 2 options (see below). W…"

mattd2 replied Oct 18, 2012 to Lauter Grant

18 Oct 19, 2012
Reply by Guy Gibson

"The 30A rating seems like overkill for a home brew pump, mines "big" and it is only…"

mattd2 replied Oct 18, 2012 to Lauter Grant

18 Oct 19, 2012
Reply by Guy Gibson

RSS

© 2025   Created by nzbrewer.   Powered by

Badges  |  Report an Issue  |  Terms of Service