Want to place an ad email luke@realbeer.co.nz
$50+GST / month

RealBeer.co.nz

Sam DT's Discussions (212)

Discussions Replied To (184) Replies Latest Activity

"These are good - they're how I started out when I went all grain - Did my first five…"

Sam DT replied Jul 6, 2015 to Where Do You Buy Already Milled/crushed Grain For BIAB?

14 Jul 6, 2015
Reply by Peter Smith

"For a standard system you get it to temperature and then you wrap it up in insulatio…"

Sam DT replied Jul 3, 2015 to Mash Temp. How low is too low?

7 Jul 3, 2015
Reply by Peter Smith

"Hi all, I've been having a bit of a dig around including talking to some of the trad…"

Sam DT replied Jul 1, 2015 to 150L stock pot

15 Jul 13, 2015
Reply by Sam DT

"How did you go with this in the end? I see brewtopia/allgrain have what looks to be…"

Sam DT replied Jun 23, 2015 to 150L stock pot

15 Jul 13, 2015
Reply by Sam DT

"Thanks for the feedback all, I think my main concern was reducing tannins - took abo…"

Sam DT replied May 26, 2015 to Three Week IPA 1.065 OG

4 May 26, 2015
Reply by Sam DT

"Nice, keen to hear how pressure relief valve goes - have been thinking about this as…"

Sam DT replied May 26, 2015 to 50L Keg Brewing

22 May 26, 2015
Reply by Peter Smith

"Probably cheaper than you're aiming for but a sleeping bag works a treat. I get abou…"

Sam DT replied May 14, 2015 to Mash tun insulation

25 Jun 15, 2015
Reply by Cain Harland

"Those hoses look good - what type do you use? Looks like most of the food grade stuf…"

Sam DT replied May 5, 2015 to Keggle Fitout Advice

6 May 10, 2015
Reply by Boon

"It probably needs more time in the primary - 2 weeks minimum but ideally three. Yeas…"

Sam DT replied Feb 23, 2015 to 2nd brew - stuffed it?

1 Feb 23, 2015
Reply by Sam DT

"I got a batch of larger caps from brewers coop and have been using them on green cha…"

Sam DT replied Feb 23, 2015 to Thick walled Champagne style bottles, 330ml/500ml. or anything

6 Feb 23, 2015
Reply by oliver

RSS

© 2025   Created by nzbrewer.   Powered by

Badges  |  Report an Issue  |  Terms of Service