Want to place an ad email luke@realbeer.co.nz
$50+GST / month

RealBeer.co.nz

Does anybody know if there is someone who makes conical fermentors on the homebrewer scale in nz? or does anyone have expereince with ordering these from overseas? what sort of prices etc

Views: 21797

Reply to This

Replies to This Discussion

It's not conical but in case anyone is interested:
http://www.trademe.co.nz/Crafts/Other/auction-155955467.htm
$600 for a corny and a big pot with a tap. Sure it has legs and is kind of "set up" but that's a bit pricey isn't it?
Or am I just getting to be a cheap bugger in my old age...
Has anybody got any new recommendations on this? I'm interested in a 50L SS conical. Cheers
http://www.inibrewsupply.com/ferment/ for Blichmann bling. Aint cheap but is here in NZ.

I was in contact with these guys in China a while back : http://www.hsmachine.com/ .  630 USD for a 50 ltr cinical but they will only ship a minimum of 5 ata time so you'd need a few people in with you unless you want 5 all for yourself.

 

I know a few welders and asked for a quote for a bog standard 50 ltr fermenter and got quoted $600 and that is because he knows me and we doing a cheap quote. The expensive part is getting the cone rolled and the valve. What he planned to do was just buy a short piece of a wide diameter SS pipe, put a come and legs on one end and a lid on the other. A few hundred $$ doens't get you much nowadays!!

 

Needless to say I,m still using my plastic FV I got for free and making beer that is more than drinkable.

Suprised no ones mentioned Farra's ones? http://www.farra.co.nz/products.php

I've been happy with the ones I got from Farra.

One of the key features that I like is that I can easily cap my beer and carbonate it at the tail end of fermentation. With some beers this makes it possible to keg conditioned beer within 8-10 days of brewing. I've fitted some adjustable pressure relief valves to the valves on the lids and don't worry about blowing them up (I set the PRV to 1.1 bar /15 psi).

For very active fermentations I fit a blow-off hose to the lid instead of the PRV.

I got my conicals with a 152mm threaded opening for the lid so I could fit my arm inside to scrub away any deposits from fermentation.

I was going to, but instead I thought that you might have a go at fabricating them.

Keg King in Melbourne have good priced S/S conical fermenters from 30L to 100L.

http://www.kegking.com.au/

 

i have one made by steve the boss from farra , looks great from the out side BUT THE WELDING ON THE INSIDE IS SH1T!!!!  paid $450.00 + freight  . it was a wast of money , should have saved a bit longer and got one with on welding on the inside. thats how bad it is on the inside

What exactly is bad about the welding, can you share some pics to show us what to look out for? I can't imagine a shop that deals with a fair amount of SS to not back purge or anything like that? Is there lack of fusion on the backside of the weld? I would think it to be near impossible for anyone to be able to weld on the inside of a vessel so small. What did Farra say about it?

Sorry about the 20 Qs, Cheers!

hi will try and get some photos over the week end

big dags of weld on the cone to body and gaps wear the fusion has not gone right though and black pits wear the legs have been welded on 

i had the racking cane and the tri clamp fitting on the valve welded at crown in invers and the welds are so good 

 

RSS

© 2024   Created by nzbrewer.   Powered by

Badges  |  Report an Issue  |  Terms of Service