Want to place an ad email luke@realbeer.co.nz
$50+GST / month

RealBeer.co.nz

Smiffy's Discussions (260)

Search Forum

View

Discussions Replied To (246) Replies Latest Activity

"The measurements in the auctions work out OK, have you just measured its size?"

Smiffy replied Dec 20, 2011 to Pot quality...

 49 Jan 14, 2013
Reply by Karl Hayes

"I remembered that anodising involves creating a thicker tougher oxide layer, but on…"

Smiffy replied Dec 19, 2011 to Mecjar? Anyone got one, know much about them?

 7 Dec 19, 2011
Reply by Ralph

"I've just collected one I bought months ago (before I got some s/s sanke kegs). Did…"

Smiffy replied Dec 19, 2011 to Mecjar? Anyone got one, know much about them?

 7 Dec 19, 2011
Reply by Ralph

"Glad it worked. Did you have the keg tilted when you hooked up the hand pump? Did yo…"

Smiffy replied Dec 11, 2011 to Advice on priming beer to be served by hand pump

 14 Dec 12, 2011
Reply by Ralph

"My G-type connectors (from the UK) have a 5/8" pipe thread however when I was lookin…"

Smiffy replied Dec 6, 2011 to Advice on priming beer to be served by hand pump

 14 Dec 12, 2011
Reply by Ralph

"If the cylinder test had expired, you can't really complain that they insisted on a…"

Smiffy replied Dec 6, 2011 to Wellington CO2 Filling

 21 Apr 15, 2017
Reply by Carl

"The beer pick-up (the "spear") in a sankey keg is very close to the bottom, so with…"

Smiffy replied Dec 5, 2011 to Advice on priming beer to be served by hand pump

 14 Dec 12, 2011
Reply by Ralph

"He certainly sounded like a salesman, exaggerating the problems of home-brewing out…"

Smiffy replied Dec 5, 2011 to Simon Morton's This Way Up - Home Brewing Segment with Stu McKinlay.

 31 Dec 5, 2011
Reply by Tilt

"Someone said: "mine constantly 'go' along the seam". So you're not the only one."

Smiffy replied Dec 4, 2011 to Corny out fittings - anyone else had this?

 5 Dec 4, 2011
Reply by denimglen

"I think that the journey there will probably release too much of the CO2. I'm just l…"

Smiffy replied Dec 4, 2011 to Advice on priming beer to be served by hand pump

 14 Dec 12, 2011
Reply by Ralph

RSS

Help Fund This Site

EPIC BEER
MIXED PACKS

FRESH LIQUID YEAST!!!

DIRECT FROM THE LAB

AMAZING VIABILITY

ORDER
Download Catalogue

Luke's Beer+

Post IPA Beerpocalypes

Malthouse’s West Coast IPA Challenge outgrows venue

Taranaki’s regional Society of Beer Advocates (Soba)...

[WARNING] Craft Beer in Crisis?

Gin is the new IPA

Four Of A Kind – Epic Armageddon’s Winning Hand

Over 400 different beers and ciders from 83 brewers were...

Who Are These NZ Breweries Entering World Beer Cup?

"Making batches of beer with a single hop “rarely yields a beer that could be an actual ongoing..."

Retailers are reporting a big jump in sales and Trade Me says...

Events

Top Content 

1 NZ limits to annual home brew production?

NZ limits to annual home brew production?
2 Beer Infection - Ongoing

Beer Infection - Ongoing
3 Avoid kegresources.co.nz at all cost!

Avoid kegresources.co.nz at all cost!
4 stainless steel mesh

stainless steel mesh
5 Still bad Panhead brews out there

Still bad Panhead brews out there

© 2025   Created by nzbrewer.   Powered by

Badges  |  Report an Issue  |  Terms of Service